Menu
The little version of the R771165, small and light with good wave breaking properties. Ideal for training purposes.
Length: 16,6 m, 25 m, 50 m or special lengths
Diameter: approx. 60 mm
Target group: Swimming training
Facilitates lane swimming at “rush hour” as a one-way system, so that in two lanes you can always swim in a circle through line arcs and thus no oncoming traffic is created. Consisting of two beautifully shaped rolled round tube brackets with a breakwater line R771165 with turnbuckle tensioned in between. For insertion into the ground sockets which are often already present.
Material: stainless steel V4A (1.4571)
Swim-through opening: approx. 1.800 mm
Length: 25 m or special length
Very durable. Made of stainless steel cable with rubber coating, with hostal floats in red and white.
Incl. turnbuckle and fastening hooks.
Vailable in any length.
Standard version: six floats per meter
Optional: balls close together or with fastening spring
Extremely stable structure, with integrated special bottom sleeve for complete immersion in the pool surround or position lock by turning 90 degrees.
Standard: DIN 7939
Target group: Separation rope holder or swimming line holder
Height from tile: approx. 90 mm
Depth of ground socket: 200 mm
The stable feed-through tube is equipped with a waterproof cover with a fastening eye for the attachment of the swimming line. The fold-out guide roller protects the swimming line and facilitates handling. Not to be opened by unauthorized persons. The lid is equipped with a non-slip grooved stainless steel surface or optionally with coloured glass fibre reinforced plastic sanding (slip class C). An optional sealing flange can be welded on for alternative sealing.
Maximum line diameter approx. 120 mm.
Pipe size: Ø 220 mm
Length: 465 mm or special length
Positioning: in the indoor pool in extension of the swimming lane lines in the pool surround.
Material: stainless steel V4A (1.4571)
The conical round containers made of glass fibre reinforced plastic allow the swimming lines to be inserted cleanly without getting caught. A floor drain socket allows free water drainage or connection to a drain hose. The installation is made with ropes on the basement ceiling. A corresponding area must be left free in the basement during planning.
Colour: blue
R1611-50: for 50 m Wavekiller swimming line
Size: 1.400 x 800 mm
Positioning: approx. 500 to 800 mm below the basement ceiling
The line trolley R771166E with line reel R99204E is very durable and offers a lot of stability for the swimming lines due to the glass fibre full discs and a large take-up reel. If you have a small budget, it is sufficient to take only one R771166E line trolley per project and the corresponding number of line reels.
They are available in two widths:
1) Total width 750 mm for 1 x 50 m or 2 x 25 m MINI Wavekiller line R771164
2) Total width 900 mm for 1 x 50 m or 2 x 25 m FINA Wavekiller line R771165
Height: approx. 1.300 mm
Made of 40 mm tube with stable eyelet and red ball.
Height above tiles: approx. 200 mm incl. ball plus 100 mm ground socket
The ground socket is equipped with a screw-out integrated cover. The cover remains screwed in during normal operation and allows the swimming pool equipment to be inserted and removed without losing a cover. The remaining narrow slot prevents fingers or toes from being trapped or squeezed. For cleaning purposes the lid can be unscrewed with a tool. For a stable positioning of the swimming pool equipment.
The optimum version for new or refurbished swimming pools. As an option, the ground sleeve can be equipped with a sealing flange to ensure optimum sealing.
Inner diameter: 40 mm
Length: 100 mm
Material: Stainless steel V4A (1.4571) and PE
Consisting of a red-white flag line and 2 supports. The line is released by a special release device in case of a false start and falls on the water.
Standard: FINA
Size: support height approx. 1,350 mm above pool edge, length individually according to pool width
Target group: swimming competitions
Positioning: 15 m from the edge of the pool where the start takes place
Material: stainless steel V4A (1.4571)
Made of stainless steel, with slotted holes for 63% water permeability, with integrated swimming lane line holders (R98A). When ordered, the spacers are adapted to the pool head. Suitable for e.g. Wiesbaden gutter, Finnish gutter, stainless steel gutter, etc.
Standard: DIN EN 13451-6 and FINA
Size: approx. 300 mm above water level, approx. 2,500 mm long
Target group: swimming competitions
Positioning: flush with the edge of the pelvis on both sides of the pelvis
Material: stainless steel V4A (1.4571)
As the R161102, but without roller and other dimensions:
Pipe size: Ø 170 mm
Length: 450 mm or special length
The line trolley R771166E with line drum R99204E is very durable and offers a lot of stability for the swimming lines due to the glass fibre reinforced plastic full discs and a large take-up roll. If you have a small budget, it is sufficient to take only one R771166E line trolley per project and the corresponding number of line drums.
They are available in two widths:
1) Total width 750 mm for 1 x 50 m or 2 x 25 m MINI Wavekiller line R771164
2) Total width 900 mm for 1 x 50 m or 2 x 25 m FINA Wavekiller line R771165
Height: approx. 1.300 mm
Adjusted line holder with eyelet at the pool edge, which allows standard swimming line lengths to be used.
Norm: DIN EN 13451
Size: Length adapted to the pelvic head
Target group: swimming competitions and training
Material: stainless steel V4A (1.4571)
The line trolley R771166E with line reel R99204E is very durable and offers a lot of stability for the swimming lines due to the glass fibre full discs and a large take-up reel. If you have a small budget, it is sufficient to take only one R771166E line trolley per project and the corresponding number of line reels.
They are available in two widths:
1) Total width 750 mm for 1 x 50 m or 2 x 25 m MINI Wavekiller line R771164
2) Total width 900 mm for 1 x 50 m or 2 x 25 m FINA Wavekiller line R771165
Height: approx. 1.300 mm
Use this linen trolley for
3 x 50 m or 6 x 25 m FINA Wavekiller line R771165 or
4 x 50 m or 8 x 25 m Mini Wavekiller leash R771164 or Hostalen leashes.
The lines are stabilised on the sides by full glass fibre discs.
Size: length x width x height: 1.800 x 1.117 x 1.430 mm
Material: stainless steel V4A (1.4571), glass fibre reinforced plastic (GfK)
Required floor space approx. 1350 x 2000 mm
© Roigk.de, 2020
Agentur: kommamedia.de
Contact
ROIGK GmbH & Co.
Hundeicker Straße 11–19
58285 Gevelsberg
Germany
Tel.: +49 2332 969999
Email: info@roigk.de
Language settings will be available soon. In this time please use the translation feature of your browser (you’ll find this under settings, translation). Otherwise please contact our team to get personal help and consultation!