Menu
Very durable. Made of stainless steel cable with rubber coating, with hostal floats in red and white.
Incl. turnbuckle and fastening hooks.
Vailable in any length.
Standard version: six floats per meter
Optional: balls close together or with fastening spring
As the R161102, but without roller and other dimensions:
Pipe size: Ø 170 mm
Length: 450 mm or special length
The line trolley R771166E with line drum R99204E is very durable and offers a lot of stability for the swimming lines due to the glass fibre reinforced plastic full discs and a large take-up roll. If you have a small budget, it is sufficient to take only one R771166E line trolley per project and the corresponding number of line drums.
They are available in two widths:
1) Total width 750 mm for 1 x 50 m or 2 x 25 m MINI Wavekiller line R771164
2) Total width 900 mm for 1 x 50 m or 2 x 25 m FINA Wavekiller line R771165
Height: approx. 1.300 mm
The line holder is located in a ground sleeve at the edge of the pool and can be removed; the eyelet for hanging up the swimming lane lines is extended so far forward to the edge of the pool that the eyelet can be positioned exactly above the edge of the pool. The line holder is electropolished for corrosion protection reasons. Manufactured according to DIN EN 13451.
To accommodate stop walls, a round tube with a locking screw is placed on the line holder, into which the fixing tube of the stop walls can be inserted and aligned.
Material: stainless steel V4A (1.4571) electropolished
The dimension from the middle of the sleeve to the front edge of the pelvis is required before production
Consisting of a red-white flag line and 2 supports.
Standard: FINA
Size: support height approx. 1,850 mm, length individually according to basin width
Target group: swimming competitions
Positioning: in each case 5 m from the edge of the pool, two back turning systems are required per pool
Material: stainless steel V4A (1.4571)
As an option, we can equip the water features with a hand wheel for even more interactivity. Turn the handwheel by 90 degrees and turn it further and the water flows again. Beautiful hand wheel made of colourshine glass, available for different attractions.
The conical round containers made of glass fibre reinforced plastic allow the swimming lines to be inserted cleanly without getting caught. A floor drain socket allows free water drainage or connection to a drain hose. The installation is made with ropes on the basement ceiling. A corresponding area must be left free in the basement during planning.
Colour: blue
R1611-25: for 25 m Wavekiller swimming line
Size: 1.250 x 800 mm
Positioning: approx. 500 to 800 mm below the basement ceiling
Made of stainless steel, with slotted holes for 63% water permeability, with integrated swimming lane line holders (R98A). When ordered, the spacers are adapted to the pool head. Suitable for e.g. Wiesbaden gutter, Finnish gutter, stainless steel gutter, etc.
Standard: DIN EN 13451-6 and FINA
Size: approx. 300 mm above water level, approx. 2,500 mm long
Target group: swimming competitions
Positioning: flush with the edge of the pelvis on both sides of the pelvis
Material: stainless steel V4A (1.4571)
The ground socket is equipped with a screw-out integrated cover. The cover remains screwed in during normal operation and allows the swimming pool equipment to be inserted and removed without losing a cover. The remaining narrow slot prevents fingers or toes from being trapped or squeezed. For cleaning purposes the lid can be unscrewed with a tool. For a stable positioning of the swimming pool equipment.
The optimum version for new or refurbished swimming pools. As an option, the ground sleeve can be equipped with a sealing flange to ensure optimum sealing.
Inner diameter: 40 mm
Length: 100 mm
Material: Stainless steel V4A (1.4571) and PE
The floor lead-through enables the easy passage of FINA or training swimming lane lines into the basement. Optimal for competition swimming lane lines up to 150 mm diameter. E.g. Malmsten competition line “Gold Racing Lane Line” for Olympic Games.
In the basement, the floor lead-through is supplemented by optional collection containers. The stable feed-through tube is equipped with a waterproof cover with a fixing eyelet to hold the swimming line. The fold-out guide roller protects the swimming line and facilitates handling. Not to be opened by unauthorized persons. The lid is equipped with a non-slip grooved stainless steel surface or optionally with a coloured GRP sanding (slip class C). An optional sealing flange can be welded on for an alternative sealing.
Maximum swimming line diameter approx. 150 mm.
Size: approx. Ø 270 mm
length: 465 mm or special length
Positioning: in the indoor pool in extension of the swimming lane lines in the pool surround.
Material: stainless steel V4A (1.4571) 316Ti
The stable feed-through tube is equipped with a waterproof cover with a fastening eye for the attachment of the swimming line. The fold-out guide roller protects the swimming line and facilitates handling. Not to be opened by unauthorized persons. The lid is equipped with a non-slip grooved stainless steel surface or optionally with coloured glass fibre reinforced plastic sanding (slip class C). An optional sealing flange can be welded on for alternative sealing.
Maximum line diameter approx. 120 mm.
Pipe size: Ø 220 mm
Length: 465 mm or special length
Positioning: in the indoor pool in extension of the swimming lane lines in the pool surround.
Material: stainless steel V4A (1.4571)
With curved roof and guide tube for ground socket R771172, articulated
Material: stainless steel V4A (1.4571)
For swimming lane delimitation for international competitions from wave-breaking, disc-shaped swimmers on a washed V4A stainless steel cable with a red turnbuckle that can be mounted without tools, with practical fastening hooks on both sides. All plastic parts are highly UV-resistant. All parts are screwable (without fixed clamps). Colours and safety spacer according to standard.
Standard: DIN EN 13451-5
Length: 16.6 m, 25 m, 50 m or special lengths
Diameter: approx. 110 mm
Target group: swimming competitions
Consisting of a red-white flag line and 2 supports. The line is released by a special release device in case of a false start and falls on the water.
Standard: FINA
Size: support height approx. 1,350 mm above pool edge, length individually according to pool width
Target group: swimming competitions
Positioning: 15 m from the edge of the pool where the start takes place
Material: stainless steel V4A (1.4571)
Collecting bag made of thick-walled fabric tarpaulin for floor lead-throughs for clean storage of swimming lines. Sturdy thick-walled design with 4 x suspension ropes with ceiling fixing screws. incl. drain with connection possibility for hose.
Version: for 50m lines
Material: Woven tarpaulin
Drm. 1400 mm, height 800 mm
Appropriate for: 40 mm tube or ground sockets for 40 mm tube
For welding to railing supports, handle arches, floor ducts or ground sockets at the height of the sealing level.
Sealing area according to recommendations of the ZDB (Zentralverband Deutsches Baugewerbe) for swimming pool construction 2012.
Material: Stainless steel V4A (1.4571)
© Roigk.de, 2020
Agentur: kommamedia.de
Contact
ROIGK GmbH & Co.
Hundeicker Straße 11–19
58285 Gevelsberg
Germany
Tel.: +49 2332 969999
Email: info@roigk.de
Language settings will be available soon. In this time please use the translation feature of your browser (you’ll find this under settings, translation). Otherwise please contact our team to get personal help and consultation!