Menu
The fulcrum allows the jumper to simply adjust the board softer or harder as desired. In public operation the roller can be fixed by a parking brake. The fully rubberized roller is gentle on the board and the equipment. The adjustment is done by means of a toothed belt.
Drill hole distance floor mounting: 600 x 600 mm
Material: stainless steel V4A (1.4571) powder-coated for improved corrosion resistance
Type Duraflex 16ft.
Length: 488 cm
Width: 49,5 cm
Target group: public swimming pools, public operation, school sports
Material: Duraluminium
The springboards are made of glass fibre reinforced plastic without wooden inlay and are sanded with non-slip sand (slip class C). This construction is especially characterized by the positive swinging characteristics. Our springboards have been used for many years for mass sports with great success. The springboards, including screws and stainless steel straps, comply with the regulations of DIN EN 13451-10 and are TÜV tested.
Colour: lateral white (RAL 9016) and coating grey (RAL 7015) or special colours
Size: 500 x 4.800 mm
Suitable for Roigk roller adjustment R771252, end bearing R31 and damper R32
Target group: public swimming pools, public operation, school sports
Material: Glass fibre reinforced plastic (GfK)
In light appearance on a single round column. With VSG full glass railing for extra light look. Ascent can be from the right or left. The jump system is equipped to accommodate the Roigk roller adjustment R771252, the Roigk noise absorber R32 and the Roigk end bearing R31 or alternatively the Durafirm springboard base R771161.
Required minimum water depth according to standard: 3.700 mm
Material: Covering GfK, stainless steel 1.4571 (316Ti) electropolished
On request, the system can also be colour coated.
With VSG full glass railing for extra light look.
In light appearance on a single round column. Ascent can be from the right or left. The 5 m system must always be combined with a 3 m system, as the ladders may only be a maximum of 3,000 mm long.
Required minimum water depth according to standard: 3,700 mm
Material: Covering glass fibre reinforced plastic, stainless steel 1.4571 (316Ti) electropolished
On request, the system can also be colour coated.
In light appearance on a single round column. Ascent can be from the right or left. The jump system is equipped to accommodate the Roigk roller adjustment R771252, the Roigk noise absorber R32 and the Roigk end bearing R31 or alternatively the Durafirm springboard base R771161.
Required minimum water depth according to standard: 3.700 mm
Material: Covering GfK, stainless steel 1.4571 (316Ti) electropolished
On request, the system can also be colour coated.
As an option, we can equip the water features with a hand wheel for even more interactivity. Turn the handwheel by 90 degrees and turn it further and the water flows again. Beautiful hand wheel made of colourshine glass, available for different attractions.
In light appearance on a single round column. Ascent can be from the right or left. The 5 m model must always be combined with a 3 m model, as the ladders may only be a maximum of 3,000 mm long.
Required minimum water depth according to standard: 3,700 mm
Material: glass fibre reinforced plastic covering, railing and ladder stainless steel 1.4571 (316Ti) electropolished, column and platform galvanised steel
On request, the model can also be colour coated.
Useful when using height-adjustable lifting floors. The electric lifting device effectively prevents stepping on the springboard when the lifting floor is raised by inclining the springboard to prevent jumping off. Electrical adjustment with low voltage motor and end stop signal for transfer to the customer’s control system. Only suitable for a new diving board, as the system is attached to the diving tower frame and must be planned in advance.
Input voltage: 24 V DC (cable 2 x 2.5 mm²)
Input current: 2 – 21 A
Protection class: IP 66 (dynamic)
Material: V4A (1.4571) powder-coated RAL 7015
In light appearance on a single round column. Ascent can be from the right or left.
Required minimum water depth according to standard: 3,500 mm
Material: glass fibre reinforced plastic covering, railing and ladder stainless steel 1.4571 (316Ti) electropolished, column and platform galvanised steel
On request, the system can also be colour coated.
The very robust end bearing made of 40 mm square solid material is mounted in plastic with low noise.
Drill hole distance floor mounting: 150 x 600 mm
Distance between drill holes for board screws: 120 + 120 + 120 mm
Material: stainless steel V4A (1.4571) powder-coated for improved corrosion resistance
In light appearance on a single round column. Ascent can be from the right or left. The 5 m system must always be combined with a 3 m system, as the ladders may only be a maximum of 3,000 mm long.
Required minimum water depth according to standard: 3,700 mm
Material: Covering glass fibre reinforced plastic, stainless steel 1.4571 (316Ti) electropolished
On request, the system can also be colour coated.
The springboards are made of glass fibre reinforced plastic without wooden inlay and are sanded with non-slip sand (slip class C). This construction is especially characterized by the positive swinging characteristics. Our springboards have been used for many years for mass sports with great success. The springboards, including screws and stainless steel straps, comply with the regulations of DIN EN 13451-10 and are TÜV tested.
Colour: lateral white (RAL 9016) and coating grey (RAL 7015) or special colours
Size: 500 x 4.500 mm
Suitable for Roigk roller adjustment R771252, end bearing R31 and damper R32
Target group: public swimming pools, public operation, school sports
Material: Glass fibre reinforced plastic (GfK)
This product consists of the combination of a 3-meter diving platform, a 5-meter diving platform, a 7.5-meter diving platform and a 10-meter diving platform in a tower. The superimposed 5 m and 10 m platforms result in a very space-saving and lightweight construction. Deviations in the arrangement of the platforms or extra wide platforms for FINA competitions or Olympic Games are optionally possible.
Required minimum water depth according to standard: 4.500 mm
Material: glass fibre reinforced plastic covering, railing and ladder stainless steel 1.4571 (316Ti) electropolished, column and platform galvanised steel
On request, the system can also be colour coated.
With additional taper from the roller area to the end of the board for increased flexibility and punched oblong holes (189 pieces) in the jump-off area to reduce the weight of the board tip.
Length: 488 cm
Width: 49,5 cm
Target group: exclusively admitted to all Olympic Games as well as national and international competitions.
In light appearance on a single round column. Ascent can be from the right or left. The jump system is equipped to accommodate the Roigk roller adjustment R771252, the Roigk noise absorber R32 and the Roigk end bearing R31 or alternatively the Durafirm springboard base R771161.
Required minimum water depth according to standard: 3.700 mm
Material: GRP covering, railing and ladder stainless steel 1.4571 (316Ti) electropolished, column and platform galvanised steel
On request, the system can also be colour coated.
© Roigk.de, 2020
Agentur: kommamedia.de
Contact
ROIGK GmbH & Co.
Hundeicker Straße 11–19
58285 Gevelsberg
Germany
Tel.: +49 2332 969999
Email: info@roigk.de
Language settings will be available soon. In this time please use the translation feature of your browser (you’ll find this under settings, translation). Otherwise please contact our team to get personal help and consultation!