Menu
The conical round containers made of glass fibre reinforced plastic allow the swimming lines to be inserted cleanly without getting caught. A floor drain socket allows free water drainage or connection to a drain hose. The installation is made with ropes on the basement ceiling. A corresponding area must be left free in the basement during planning.
Colour: blue
R1611-50: for 50 m Wavekiller swimming line
Size: 1.400 x 800 mm
Positioning: approx. 500 to 800 mm below the basement ceiling
Extremely stable structure, with integrated special bottom sleeve for complete immersion in the pool surround or position lock by turning 90 degrees.
Standard: DIN 7939
Target group: Separation rope holder or swimming line holder
Height from tile: approx. 90 mm
Depth of ground socket: 200 mm
The little version of the R771165, small and light with good wave breaking properties. It is ideal for training purposes.
Length: 16,6 m, 25 m, 50 m or special lengths
Diameter: approx. 60 mm
Target group: Swimming training
As an option, we can equip the water features with a hand wheel for even more interactivity. Turn the handwheel by 90 degrees and turn it further and the water flows again. Beautiful hand wheel made of colourshine glass, available for different attractions.
Internet Langtext Englisch
Consisting of a red-white flag line and 2 supports.
Standard: FINA
Size: support height approx. 1,850 mm, length individually according to basin width
Target group: swimming competitions
Positioning: in each case 5 m from the edge of the pool, two back turning systems are required per pool
Material: stainless steel V4A (1.4571)
Adjusted line holder with eyelet at the pool edge, which allows standard swimming line lengths to be used.
Norm: DIN EN 13451
Size: Length adapted to the pelvic head
Target group: swimming competitions and training
Material: stainless steel V4A (1.4571)
The floor lead-through enables the easy passage of FINA or training swimming lane lines into the basement. Optimal for competition swimming lane lines up to 150 mm diameter. E.g. Malmsten competition line “Gold Racing Lane Line” for Olympic Games.
In the basement, the floor lead-through is supplemented by optional collection containers. The stable feed-through tube is equipped with a waterproof cover with a fixing eyelet to hold the swimming line. The fold-out guide roller protects the swimming line and facilitates handling. Not to be opened by unauthorized persons. The lid is equipped with a non-slip grooved stainless steel surface or optionally with a coloured GRP sanding (slip class C). An optional sealing flange can be welded on for an alternative sealing.
Maximum swimming line diameter approx. 150 mm.
Size: approx. Ø 270 mm
length: 465 mm or special length
Positioning: in the indoor pool in extension of the swimming lane lines in the pool surround.
Material: stainless steel V4A (1.4571) 316Ti
With stainless steel cover, time adjustable, for connection to a water supply line, hose connection 1/2″.
Option for Belissima, Balena, Pingo, Flippo, Kurt, Robby, Bubu, Benny, Mobi, Ducky, Pucky, Schildi
The little version of the R771165, small and light with good wave breaking properties. Ideal for training purposes.
Length: 16,6 m, 25 m, 50 m or special lengths
Diameter: approx. 60 mm
Target group: Swimming training
Made of 40 mm tube with stable eyelet and red ball.
Height above tiles: approx. 200 mm incl. ball plus 100 mm ground socket
The ground socket is equipped with a screw-out integrated cover. The cover remains screwed in during normal operation and allows the swimming pool equipment to be inserted and removed without losing a cover. The remaining narrow slot prevents fingers or toes from being trapped or squeezed. For cleaning purposes the lid can be unscrewed with a tool. For a stable positioning of the swimming pool equipment.
The optimum version for new or refurbished swimming pools. As an option, the ground sleeve can be equipped with a sealing flange to ensure optimum sealing.
Inner diameter: 40 mm
Length: 150 mm
Material: Stainless steel V4A (1.4571) and PE
As the R161102, but without roller and other dimensions:
Pipe size: Ø 170 mm
Length: 450 mm or special length
Facilitates lane swimming at “rush hour” as a one-way system, so that in two lanes you can always swim in a circle through line arcs and thus no oncoming traffic is created. Consisting of two shapely rolled round tube stirrups with a wave breaker line R771165 with turnbuckle stretched in between. For insertion into the ground sockets which are often already present.
Material: stainless steel V4A (1.4571)
Swim-through opening: approx. 1.800 mm
Length: 50 m or special length
For swimming lane delimitation for international competitions from wave-breaking, disc-shaped swimmers on a washed V4A stainless steel cable with a red turnbuckle that can be mounted without tools, with practical fastening hooks on both sides. All plastic parts are highly UV-resistant. All parts are screwable (without fixed clamps). Colours and safety spacer according to standard.
Standard: DIN EN 13451-5
Length: 16.6 m, 25 m, 50 m or special lengths
Diameter: approx. 110 mm
Target group: swimming competitions
Collecting bag made of thick-walled fabric tarpaulin for floor lead-throughs for clean storage of swimming lines. Sturdy thick-walled design with 4 x suspension ropes with ceiling fixing screws. incl. drain with connection possibility for hose.
Version: for 25m lines
Material: Woven cover
Drm. 1250 mm, height 800 mm
As an option, we can equip the water features with a hand wheel for even more interactivity. Turn the handwheel by 90 degrees and turn it further and the water flows again. Also available optionally for water mushroom R8214-1000.
© Roigk.de, 2020
Agentur: kommamedia.de
Contact
ROIGK GmbH & Co.
Hundeicker Straße 11–19
58285 Gevelsberg
Germany
Tel.: +49 2332 969999
Email: info@roigk.de
Language settings will be available soon. In this time please use the translation feature of your browser (you’ll find this under settings, translation). Otherwise please contact our team to get personal help and consultation!