Menu
A versatile water fun. Water runs out of the colourful calyx, and four cones fill with water and splash down on the children.
Height: 2.900 mm
Water flow rate: 60 to 150 l/min
Water pressure: 0.25 to 0.3 bar
Target group: Children
Positioning: attraction pool or water feature area (max. WT = 1,300 mm or 500 mm with hand wheel)
Material: stainless steel V4A (1.4571), glass fibre reinforced plastic (GfK)
Like a large, pleasant veil of water, the water falls on the visitors in the attraction pool. The decorative water mushroom is also an eye-catcher when it is not running, because it is completely made of matt stainless steel.
Water quantity: approx. 180 m³/h
Heights: 2,515 mm
Diameter: 2.000 mm
Target group: young people and adults
Positioning: in the attraction pool
Material: stainless steel V4A (1.4571)
“There’s real work to be done here! It’s like a shuttle canal with white water and a weir,” Max shouts. As he turns the water intake wheel, the water starts to run as if by magic. Only not into the gutter. His friend Joseph quickly turns the first channel to catch the water. When he pulls the plug, the water runs from the first into the second gutter. Now Laura has had enough and she puts the plug into the second gutter to hold back the water a little. She now turns the second channel further and lets the water run into the catch basin. “Oh no, there are holes in it” she calls. “The water is running into the basin!” All the children laugh and play on happily. I’m sure there’s a lot more to discover.
You need a water connection for the inlet pipe.
Colour: blue/red or special colours
Size (L/W/H): approx. 1,500 x 1,200 x 1,300 mm
Target group: Children
Placement: in the children’s pool or on the water play area (WT = approx. 0 – 330 mm)
Material: stainless steel V4A (1.4571), Colourshine glass
Water cannon with red painted swivel head in RED Planet design. With two spray nozzles, swivels horizontally by 90 degrees and additionally vertically by about 30 degrees. With time valve.
Height: approx. 1.140 mm
Cannon: approx. 500 mm long, approx. 300 mm wide
Positioning: at the pool edge or water feature area (max. WT = 0 mm)
Material: stainless steel V4A (1.4571)
Spray angle: approx. 90 degrees horizontal and 30 degrees vertical (with stop)
Target group: Children
Three-dimensional spraying water cannon in stable one-arm design with coloured cannon head and time valve.
Height: approx. 1.165 mm
Spray angle: approx. 90 degrees horizontally and approx. 65 degrees vertically (with stop)
Water flow rate: 4 to 5 l/min
Water pressure: 1 to 2 bar
Target group: Children
Positioning: at the pool edge or water feature area (max. WT = 0 mm)
Material: stainless steel V4A (1.4571)
A wet play of colors. Water runs down from the colourful calyx onto the children. Those who dare to do so, run through the water curtain. The optional interactive hand wheel offers even more fun.
Height: 2,530 mm
Water flow rate: 80 to 160 l/min
Water pressure: 0.2 to 0.3 bar
Target group: Children
Positioning: Water play areas (max. WT = 500 mm)
Material: stainless steel V4A (1.4571), glass fibre reinforced plastic (GfK)
Mushroom diameter: 2.000 mm
Heights: 3.000 mm
Water quantity: approx. 110 m³/h
Water pressure: 0,35 bar
Target group: young people and adults
Positioning: in the attraction pool (max. WT = 1,500 mm)
Material: stainless steel V4A (1.4571), glass fibre reinforced plastic (GfK)
Interactivity through independent activation of the water mushroom by the children. Can be used as a water attraction or children’s shower. The significantly reduced amount of water creates a droplet-like water effect, which is both very suitable for small children and saves water.
Mushroom diameter: 1.000 mm
Heights: 1,600 or 2,250 mm
Water flow rate: 60 l/min
Water pressure: 1.5 to 2.5 bar
Target group: children and infants
Positioning: in the toddler pool or on the water playground
Material: stainless steel V4A (1.4571), glass fibre reinforced plastic (GfK)
The new version of the handle pump is connected to a clean water line. A tank integrated in the pump fills with fresh water. The fresh water is pumped out of the tank. There is no difference to a normal self-priming handle pump. For hygienic reasons, the container runs empty when not in use, so that no water is left standing!
Height incl. base: 1.330 mm
Water flow rate: 5 to 10 l/min
Water pressure: 1 to 2 bar
Target group: Children
Placement: at the edge of the pool or water feature area
Material: stainless steel V4A (1.4571)
A water fight is great fun! A pivoting water cannon for wild joint play with coloured cannon head. The cannon is activated by pressing a built-in time valve.
Height: approx. 1.150 mm
Spray angle: approx. 90 degrees horizontal (with stop
Water flow rate: 4 to 5 l/min
Water pressure: 1 to 2 bar
Target group: Children
Positioning: at the pool edge or water feature area (max. WT = 0 mm)
Material: stainless steel V4A (1.4571)
Mushroom diameter: 1.600 mm
Heights: 2.500 mm
Water quantity: approx. 75 m³/h
Water pressure: 0,3 bar
Target group: Children and adults
Positioning: in the attraction pool (max. WT = 1,300 mm)
Material: stainless steel V4A (1.4571), glass fibre reinforced plastic (GfK)
Mushroom diameter: 1.300 mm
Heights: 2.250 mm
Water quantity: 32 to 47 m³/h
Water pressure: 0,25 bar
Target group: Children and adults
Positioning: in the toddler pool or in the attraction pool (max. WT = 1,000 mm)
Material: stainless steel V4A (1.4571), glass fibre reinforced plastic (GfK)
Mushroom diameter: 1.000 mm
Heights: 1,600 or 2,250 mm
Water quantity: 20 to 25 m³/h
Water pressure: 0,2 bar
Target group: children and infants
Positioning: in toddler pool or water play area (max. WT = 500 mm)
Material: stainless steel V4A (1.4571), glass fibre reinforced plastic (GfK)
As an option, we can equip the water features with a hand wheel for even more interactivity. Turn the handwheel by 90 degrees and turn it further and the water flows again. Beautiful hand wheel made of colourshine glass, available for different attractions.
Internet Langtext Englisch
With stainless steel cover, time adjustable, for connection to a water supply line, hose connection 1/2″.
Option for Belissima, Balena, Pingo, Flippo, Kurt, Robby, Bubu, Benny, Mobi, Ducky, Pucky, Schildi
© Roigk.de, 2020
Agentur: kommamedia.de
Contact
ROIGK GmbH & Co.
Hundeicker Straße 11–19
58285 Gevelsberg
Germany
Tel.: +49 2332 969999
Email: info@roigk.de
Language settings will be available soon. In this time please use the translation feature of your browser (you’ll find this under settings, translation). Otherwise please contact our team to get personal help and consultation!