Menu
The springboards are made of glass fibre reinforced plastic without wooden inlay and are sanded with non-slip sand (slip class C). This construction is especially characterized by the positive swinging characteristics. Our springboards have been used for many years for mass sports with great success. The springboards, including screws and stainless steel straps, comply with the regulations of DIN EN 13451-10 and are TÜV tested.
Colour: lateral white (RAL 9016) and coating grey (RAL 7015) or special colours
Size: 500 x 4.800 mm
Suitable for Roigk roller adjustment R771252, end bearing R31 and damper R32
Target group: public swimming pools, public operation, school sports
Material: Glass fibre reinforced plastic (GfK)
The fulcrum allows the jumper to simply adjust the board softer or harder as desired. In public operation the roller can be fixed by a parking brake. The fully rubberized roller is gentle on the board and the equipment. The adjustment is done by means of a toothed belt.
Drill hole distance floor mounting: 600 x 600 mm
Material: stainless steel V4A (1.4571) powder-coated for improved corrosion resistance
In light appearance on a single round column. Ascent can be from the right or left.
Required minimum water depth according to standard: 3,500 mm
Material: Covering glass fibre reinforced plastic, stainless steel 1.4571 (316Ti) electropolished
On request, the system can also be colour coated.
Without railing
Suitable for the larger systems, the front attachment of the jumping system is on a large round column. The ascent can be made from behind, from the right or from the left. The condition for use is that the water level is lower than the pool perimeter or the same height, otherwise a railing would be required.
The diving system is equipped to accommodate the Roigk roller adjustment R771252, the Roigk noise absorber R32 and the Roigk end bearing R31 or alternatively the Durafirm diving board substructure R771161.
Required minimum water depth according to standard: 3.400 mm
Material: GRP covering, railing and ladder stainless steel 1.4571 (316Ti) electropolished, column and platform galvanised steel
On request, the system can also be colour coated.
With stainless steel cover, time adjustable, for connection to a water supply line, hose connection 1/2″.
Option for Belissima, Balena, Pingo, Flippo, Kurt, Robby, Bubu, Benny, Mobi, Ducky, Pucky, Schildi
With additional taper from the roller area to the end of the board for increased flexibility and punched oblong holes (189 pieces) in the jump-off area to reduce the weight of the board tip.
Length: 488 cm
Width: 49,5 cm
Target group: exclusively admitted to all Olympic Games as well as national and international competitions.
For up to 90% noise reduction and to protect the diving board. The silencer is highly recommended especially in indoor swimming pools.
Material: stainless steel V4A (1.4571) powder-coated for improved corrosion resistance
Drill hole distance floor mounting: 600 mm
Internet Langtext Englisch
With VSG full glass railing for extra light look.
Suitable for the larger systems, the front attachment of the jumping system is on a large round column. The ascent can be made from behind, from the right or from the left.
The diving platform with a full-surface railing is used when the pool perimeter is lower than the water level and thus a height of fall of more than 1 m would occur.
The diving board is equipped to accommodate the Roigk fulcrum R771252, the Roigk noise absorber R32 and the Roigk rear support R31 or alternatively the Durafirm diving board substructure R771161.
Required minimum water depth according to standard: 3.400 mm
Material: GRP, stainless steel 1.4571 (316Ti) electropolished
On request, the system can also be colour coated.
This product consists of the combination of a 3-meter diving platform, a 5-meter diving platform, a 7.5-meter diving platform and a 10-meter diving platform in a tower. The superimposed 5 m and 10 m platforms result in a very space-saving and lightweight construction. Deviations in the arrangement of the platforms or extra wide platforms for FINA competitions or Olympic Games are optionally possible.
Required minimum water depth according to standard: 4.500 mm
Material: glass fibre reinforced plastic covering, railing and ladder stainless steel 1.4571 (316Ti) electropolished, column and platform galvanised steel
On request, the system can also be colour coated.
As an option, we can equip the water features with a hand wheel for even more interactivity. Turn the handwheel by 90 degrees and turn it further and the water flows again. Also available optionally for water mushroom R8214-1000.
In light appearance on a single round column. Ascent can be from the right or left. The 5 m system must always be combined with a 3 m system, as the ladders may only be a maximum of 3,000 mm long.
Required minimum water depth according to standard: 3,700 mm
Material: Covering glass fibre reinforced plastic, stainless steel 1.4571 (316Ti) electropolished
On request, the system can also be colour coated.
In light appearance on a single round column. With VSG full glass railing for extra light look. Ascent can be from the right or left. The jump system is equipped to accommodate the Roigk roller adjustment R771252, the Roigk noise absorber R32 and the Roigk end bearing R31 or alternatively the Durafirm springboard base R771161.
Required minimum water depth according to standard: 3.700 mm
Material: Covering GfK, stainless steel 1.4571 (316Ti) electropolished
On request, the system can also be colour coated.
In light appearance on a single round column. Ascent can be from the right or left. The jump system is equipped to accommodate the Roigk roller adjustment R771252, the Roigk noise absorber R32 and the Roigk end bearing R31 or alternatively the Durafirm springboard base R771161.
Required minimum water depth according to standard: 3.700 mm
Material: Covering GfK, stainless steel 1.4571 (316Ti) electropolished
On request, the system can also be colour coated.
In light appearance on a single round column. Ascent can be from the right or left.
Required minimum water depth according to standard: 3,500 mm
Material: glass fibre reinforced plastic covering, railing and ladder stainless steel 1.4571 (316Ti) electropolished, column and platform galvanised steel
On request, the system can also be colour coated.
With ” CLOSED ” sticker and two hooks for hanging in diving platform ladders.
Size: 500 x 500 mm
Thickness: 2 mm
Material: stainless steel V4A (1.4571)
As an option, we can equip the water features with a hand wheel for even more interactivity. Turn the handwheel by 90 degrees and turn it further and the water flows again. Beautiful hand wheel made of colourshine glass, available for different attractions.
© Roigk.de, 2020
Agentur: kommamedia.de
Contact
ROIGK GmbH & Co.
Hundeicker Straße 11–19
58285 Gevelsberg
Germany
Tel.: +49 2332 969999
Email: info@roigk.de
Language settings will be available soon. In this time please use the translation feature of your browser (you’ll find this under settings, translation). Otherwise please contact our team to get personal help and consultation!