Menu
Facilitates lane swimming at “rush hour” as a one-way system, so that in two lanes you can always swim in a circle through line arcs and thus no oncoming traffic is created. Consisting of two beautifully shaped rolled round tube brackets with a breakwater line R771165 with turnbuckle tensioned in between. For insertion into the ground sockets which are often already present.
Material: stainless steel V4A (1.4571)
Swim-through opening: approx. 1.800 mm
Length: 25 m or special length
Collecting bag made of thick-walled fabric tarpaulin for floor lead-throughs for clean storage of swimming lines. Sturdy thick-walled design with 4 x suspension ropes with ceiling fixing screws. incl. drain with connection possibility for hose.
Version: for 50m lines
Material: Woven tarpaulin
Drm. 1400 mm, height 800 mm
Consisting of a red-white flag line and 2 supports.
Standard: FINA
Size: support height approx. 1,850 mm, length individually according to basin width
Target group: swimming competitions
Positioning: in each case 5 m from the edge of the pool, two back turning systems are required per pool
Material: stainless steel V4A (1.4571)
As the R161102, but without roller and other dimensions:
Pipe size: Ø 170 mm
Length: 450 mm or special length
Internet Langtext Englisch
With inscription ” swimmer / non-swimmer” on one or both sides.
Standard: DIN 7939
The line trolley R771166E with line drum R99204E is very durable and offers a lot of stability for the swimming lines due to the glass fibre reinforced plastic full discs and a large take-up roll. If you have a small budget, it is sufficient to take only one R771166E line trolley per project and the corresponding number of line drums.
They are available in two widths:
1) Total width 750 mm for 1 x 50 m or 2 x 25 m MINI Wavekiller line R771164
2) Total width 900 mm for 1 x 50 m or 2 x 25 m FINA Wavekiller line R771165
Height: approx. 1.300 mm
For swimming lane delimitation for international competitions from wave-breaking, disc-shaped swimmers on a washed V4A stainless steel cable with a red turnbuckle that can be mounted without tools, with practical fastening hooks on both sides. All plastic parts are highly UV-resistant. All parts are screwable (without fixed clamps). Colours and safety spacer according to standard.
Standard: DIN EN 13451-5
Length: 16.6 m, 25 m, 50 m or special lengths
Diameter: approx. 110 mm
Target group: swimming competitions
The little version of the R771165, small and light with good wave breaking properties. Ideal for training purposes.
Length: 16,6 m, 25 m, 50 m or special lengths
Diameter: approx. 60 mm
Target group: Swimming training
The conical round containers made of glass fibre reinforced plastic allow the swimming lines to be inserted cleanly without getting caught. A floor drain socket allows free water drainage or connection to a drain hose. The installation is made with ropes on the basement ceiling. A corresponding area must be left free in the basement during planning.
Colour: blue
R1611-25: for 25 m Wavekiller swimming line
Size: 1.250 x 800 mm
Positioning: approx. 500 to 800 mm below the basement ceiling
The ground socket is equipped with a screw-out integrated cover. The cover remains screwed in during normal operation and allows the swimming pool equipment to be inserted and removed without losing a cover. The remaining narrow slot prevents fingers or toes from being trapped or squeezed. For cleaning purposes the lid can be unscrewed with a tool. For a stable positioning of the swimming pool equipment.
The optimum version for new or refurbished swimming pools. As an option, the ground sleeve can be equipped with a sealing flange to ensure optimum sealing.
Inner diameter: 40 mm
Length: 150 mm
Material: Stainless steel V4A (1.4571) and PE
The little version of the R771165, small and light with good wave breaking properties. Ideal for training purposes.
Length: 16,6 m, 25 m, 50 m or special lengths
Diameter: approx. 60 mm
Target group: Swimming training
As an option, we can equip the water features with a hand wheel for even more interactivity. Turn the handwheel by 90 degrees and turn it further and the water flows again. Also available optionally for water mushroom R8214-1000.
Use this linen trolley for
3 x 50 m or 6 x 25 m FINA Wavekiller line R771165 or
4 x 50 m or 8 x 25 m Mini Wavekiller leash R771164 or Hostalen leashes.
The lines are stabilised on the sides by full glass fibre discs.
Size: length x width x height: 1.800 x 1.117 x 1.430 mm
Material: stainless steel V4A (1.4571), glass fibre reinforced plastic (GfK)
Required floor space approx. 1350 x 2000 mm
The ground socket is equipped with a screw-out integrated cover. The cover remains screwed in during normal operation and allows the swimming pool equipment to be inserted and removed without losing a cover. The remaining narrow slot prevents fingers or toes from being trapped or squeezed. For cleaning purposes the lid can be unscrewed with a tool. For a stable positioning of the swimming pool equipment.
The optimum version for new or refurbished swimming pools. As an option, the ground sleeve can be equipped with a sealing flange to ensure optimum sealing.
Inner diameter: 40 mm
Length: 100 mm
Material: Stainless steel V4A (1.4571) and PE
Facilitates lane swimming at “rush hour” as a one-way system, so that in two lanes you can always swim in a circle through line arcs and thus no oncoming traffic is created. Consisting of two shapely rolled round tube stirrups with a wave breaker line R771165 with turnbuckle stretched in between. For insertion into the ground sockets which are often already present.
Material: stainless steel V4A (1.4571)
Swim-through opening: approx. 1.800 mm
Length: 50 m or special length
© Roigk.de, 2020
Agentur: kommamedia.de
Contact
ROIGK GmbH & Co.
Hundeicker Straße 11–19
58285 Gevelsberg
Germany
Tel.: +49 2332 969999
Email: info@roigk.de
Language settings will be available soon. In this time please use the translation feature of your browser (you’ll find this under settings, translation). Otherwise please contact our team to get personal help and consultation!